Miele G 6310 Especificaciones descargar pdf (Pagina 46)

You can change the programming of your cooktop (see

chart). You can change several settings one after the other.

After starting the programming function P (Program), an S

(Status) will appear in the timer display. With cooktops that

have 3 cooking zones, an additional display appears at the

back left.

The program is displayed in the front left and back left

cooking zone displays. Example:

Program 03 = front left 0, back left 3

Program 14 = front left 1, back left 4

The status is displayed in the front right cooking zone display.

When programming is completed, a reset is carried out

automatically. This is completed when the indicator above the

s sensor comes on briefly.

Do not switch the cooktop on again until reset is

completed.

Starting the programming function

^ With the cooktop switched off, touch the s and $ sensors

at the same time until the Lock indicator flashes.

Selecting the program

To set the ones, touch the sensor for the back left cooking

zone followed by the respective number on the settings

bar.

To set the tens, touch the sensor for the front left cooking

zone followed by the respective number on the settings

bar.

Setting the status

Touch the sensor for the front right cooking zone followed

by the respective number on the settings bar.

Programming

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 71 72

Sin comentarios

Miele G 6310 Especificaciones Pagina 46