Miele GAS COMBISET CS 1011 Instrucciones de operaciones descargar pdf (Pagina 22)

Stainless steel surfaces

Clean stainless steel surfaces using a

solution of warm water and a small

amount of washing-up liquid applied

with a soft sponge. In the case of

stubborn dried-on soiling, soak first.

Finally, dry with a soft cloth.

If necessary a cleaning agent for

ceramic and stainless steel surfaces

can be used (see "Optional

accessories"). Apply with even

pressure following the direction of the

"grain".

Do not use stainless steel cleaning

agents on printed surfaces. This

would rub off the print. These areas

should be only cleaned with a

solution of warm water and a small

amount of washing-up liquid applied

with a soft sponge.

A conditioning agent for stainless steel

can be used after cleaning to help keep

your appliance looking good (see

"Optional accessories").

Apply sparingly with a soft cloth

following the instructions on the

packaging.

Pan support, control knob

Remove the pan support. Clean the

pan support and the control knob with a

solution of warm water and a small

amount of washing-up liquid applied

with a soft sponge. Stubborn soiling

should be soaked first.

After cleaning dry all surfaces with a

clean cloth.

Do not clean the pan supports in a

dishwasher.

Cleaning and care

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Sin comentarios

Miele GAS COMBISET CS 1011 Instrucciones de operaciones Pagina 22