Miele KM 361 G Manual de usuario descargar pdf (Pagina 24)

After conversion

^

Assemble all burners in the reverse

order and check for leaks by

operating them without the upper

part of the hob in place (use a match

to ignite the flame).

^

Take off all burner parts again.

^

Put the upper part of the hob in

place.

KM 360 G / KM 362 G

When replacing the stainless steel

upper section:

Position the upper section as shown in

the illustration, pushing it forwards first

of all and then backwards until the

angle bracket a clicks into place

underneath the lip b of the lower

section. Then lower the upper section.

^

Screw on the burner head and

assemble all loose burner parts in the

correct order.

^

Push the control knobs back into

place.

^

Check the behaviour of the flames by

lighting all burners.

The flame must not go out in the lowest

setting, nor when the control is turned

quickly from a high to a low setting.

In the highest setting the flame must

have a distinctive and visible core.

Place the sticker enclosed with the

conversion kit next to the data plate

underneath the appliance.

Conversion to another type of gas

24

a

b

1 2 ... 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios