Miele KM 5993 Manual de usuario descargar pdf (Pagina 56)

Making the worktop cut-out and

building in the hob

Granite and marble worktops

e Worktop

f Hob

g Gap

As the ceramic glass and the

worktop cut-out have a certain

dimensional tolerance, gap g can

vary (min. 1 mm).

^

Make the worktop cut-out as shown

in "Building-in dimensions".

^

Feed the hob connection cable down

through the cut-out.

^

Centre the hob f in the cut-out.

^

Connect the hob to the mains.

^

Check that the hob works.

^

Seal the remaining gap g with a

silicone sealant that is heat-resistant

to at least 160 °C.

For granite and marble worktops,

only use silicone sealant that is

especially formulated for granite and

marble, and observe the sealant

manufacturer's instructions.

Flush-fitted hobs

56

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Comentarios a estos manuales

Sin comentarios