Miele CS 1028 Manual de usuario descargar pdf (Pagina 51)

To check the first intake of air

e Retaining nut

f Air intake sleeve

Gap X must measure:

For Town Gas: 4 mm

For Natural Gas: 6 mm

For Liquid Petroleum Gas : 5 mm

If it does not:

– Loosen the retaining nut, adjust the

air intake sleeve, and tighten the

retaining nut again.

– Finally secure the jet against

inadvertent loosening with sealing

wax.

–

Reassemble the hob in the reverse

order.

The flame must not go out on the lowest

setting, or when the control is turned

quickly from a high to a low setting.

On the highest setting the flame must

have a distinctive and visible core.

Conversion to another type of gas

51

1 2 ... 46 47 48 49 50 51 52 53 54 55 56

Comentarios a estos manuales

Sin comentarios