Miele CS1221 Manual de usuario Pagina 1

Operating and InstallationInstructionsCeramic combiset with InductionCS 1221To prevent accidents andappliance damage,read these instructionsbeforeinst

Clean the combiset^Before using for the first time, cleanthe appliance with a damp cloth anddry with a soft cloth.Do not use liquid dish soap to clean

How it worksAn induction coil is located under theburner. When the burner is switchedon, this coil creates a magnetic fieldwhich impacts directly on t

NoisesWhen using an induction burner, thefollowing noises can occur in the pan,depending on what it is made of andhow it is constructed.–Higher power

CookwareSuitable pans include:–stainless steel pans with a magneticbase–enameled steel pans–cast iron pansUnsuitable pans:–stainless steel pans withou

Turning the burner On/Off^To turn the burner on, press thecontrol knob down and turn itclockwise a to the desired setting.^To turn the burner off, tur

SettingsUse for Power level*Melting butter, chocolate, etc.Dissolving gelatinPrepare yogurt1-2Warming small quantities of food or liquidKeeping delica

Auto-heatWhen Auto-heat has been activated,the burner switches on automatically atthe highest setting and then switches tothe continued power level wh

Booster functionThe burner is equipped with a boosterfunction to temporarily increase thepower level. This boost is intended toquickly bring large qua

Keep warmThis function can be used for keepingfood warm right after it has beencooked. It is not for reheating foodwhich has already cooled.Once activ

Child Safety LockKeep children away from thecombiset for their own safety.The combiset has a Child Safety Lockto prevent children from turning on theb

IMPORTANT SAFETY INSTRUCTIONS...3Guide to the combiset ...8Display ...

Overheating protectionThe induction coils and the coolingelement of the electronics are fitted withan overheating protection feature. Thisprevents the

Do not use a steam cleaner to cleanthis appliance. Steam couldpenetrate electrical components andcause a short circuit. Pressurizedsteam could cause p

Stainless steelClean stainless steel surfaces withwarm water and liquid dish soapapplied with a non-abrasive spongeand then wipe dry with a soft cloth

,Repairs should only be carried out by an authorized technician inaccordance with local and national safety regulations. Unauthorized repairscould cau

What if the combiset turns itself off automatically?Possible fault SolutionEither the "Safety cut-out" feature or the"Overheating prote

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this bo

MieleCare(USA only)MieleCare, our Extended ServiceContract program; gives you theassurance of knowing that yourappliance investment is covered by 5yea

Installation InstructionsIMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USETo prevent accidentsand appliance damageread these instructionsb

Note to the installer:Please leave this instruction bookwith the consumer for the localelectrical inspector’s use.The minimum distances given inthese

Safety distances above theapplianceThe minimum safety distance given bythe hood manufacturer must bemaintained between the combiset andthe hood above

WARNING- When using yourappliance follow basicprecautions, including thefollowing:Read all instructions beforeinstallation or use to preventinjury and

Safety distances to the sidesof the applianceThe appliance should only be installedas shown in the illustrations, whilemaintaining the required safety

Safety distance from the wall coveringIf a wall covering is installed, a minimum safety distance must be maintainedbetween the countertop cut-out and

Installation dimensionsa Spring clipsb Appliance frontc Installation heightd Power supply box with connection cablee Rating labelInstallation32

Cut out^Make the countertop cut-out for thedesired number of appliances.Remember to maintain a minimumsafety distance from the back wall,as well as fr

Installation of multipleappliancesWhen installing more than one combiset appliance, a support bar b must beinstalled between the appliances.Countertop

Sample calculations for a countertop cut-out for three appliancesAappliance widthminus 5/16"(8 mm)Bappliance widthCappliance widthminus 5/16"

a Spring clipsb Support barsc Space between support bar and countertopd Sealing stripThe illustration represents the attachment of spring clips a and

Attach the spring clips andsupport barsWood or solid surface countertops^Place the supplied spring clips aand the support bars b at themarked position

Granite countertopThe screws are not needed forgranite countertops.^Position and attach the spring clipsa and support bars b with strong,double-sided

Installing the appliance /appliances^Feed the power cord down throughthe cut-out.^Place the front edge of the applianceinto the cut-out.^With a hand o

Technical Safety~Installation, repair and maintenancework should be performed by a Mieleauthorized service technician. Work byunqualified persons coul

SealingThe appliance must not be permanentlysealed into the countertop wheninstalled. The sealing strip under theedge of the appliance provides asuffi

,CAUTION: Before installation orservicing, disconnect the powersupply by either removing the fuse,shutting off the main power ormanually "trippin

Disposal of packing materialsThe cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle.Ensure that any plastic wrappings,

43

Alteration rights reserved / 4609For the most updated manual see the Miele web site.M.-Nr. 07 346 540 / 03

~Do not cook on a broken combiset.Any breakages or cracks in the ceramicsurface of the appliance are defectsand must be treated as such. If thecombise

~Do not use the appliance until it hasbeen properly installed in thecountertop.~Do not store items on the appliancewhen not in use. Items could melt o

~Be careful not to drop anything onthe ceramic surface of the combiset.Even lightweight objects may causedamage.~Pot and pan handles should beturned i

a Burner with boosterb Displayc Indicatorsd Control knobIndicatorsl On/Off indicatorm Booster indicatorn "Residual Heat" indicatorGuide to t

Displayß = No pan on burner or pan is unsuitableA = Auto-heatF = Fault (see "Frequently asked questions")C / 0 = Safety cut-out feature (see