Miele KM 360 G Especificaciones descargar pdf (Pagina 62)

Page 62 of 100

Cleaning

Follow manufacturer's directions for cleaning fixtures. Avoid abrasive cleansers. They remove the

shiny finish and leave behind a porous surface that is difficult to keep clean. Clean plumbing

fixtures with a soft sponge and soapy water (a nonabrasive cleaner or a liquid detergent is usually

recommended by manufacturers). Then polish the fixtures with a dry cloth to prevent water spots.

Clogs

Many plumbing clogs are caused when foreign materials are inserted into plumbing lines.

Examples of foreign materials include disposable diapers, excessive amounts of toilet paper,

sanitary supplies, q-tips, dental floss, and children's toys. Improper garbage disposal use also

causes many plumbing clogs. Always use plenty of cold water when running the disposal. Allow

the water to run 10 to 15 seconds after shutting off the disposal. You can usually clear clogged

traps with a plumber's helper (plunger). If you use chemical agents, follow directions carefully to

avoid personal injury or damage to the fixtures. Waste materials, including grease, fat and

petroleum products, should never be disposed of via the plumbing system. These materials

will accumulate in the piping, especially in the p-traps, and can significantly reduce the flow of

water through the waste system. These substances are also very detrimental to the municipal

sewage treatment systems. To clean a drain stopper (usually found in bathroom sinks), loosen

the nut under the sink at the back, pull out the rod attached to the plunger and lift the stopper.

Clean and return the mechanism to its original position.

Low Flush Toilets

Due to conservation efforts and by-law regulations, today’s toilets use less water. In fact, today’s

toilets use 2/3 less water than the old standard toilets. As a result, flushing twice is occasionally

necessary to completely empty the toilet bowl. Rest assured, even when you flush twice, you are

saving water and complying with the law.

Low flush toilets may clog more easily. As such, it is recommended that you do not dispose of

large volumes of paper or any feminine products in the toilet.

Water Flow Restrictors

Water flow restrictors are manufactured into most faucets and all showerheads and cannot be

removed. We apologize for any inconvenience this may cause.

Dripping Faucet

You can repair a dripping faucet by shutting off the water at the valve directly under the sink, then

removing the faucet stem, changing the washer, and reinstalling the faucet stem. The showerhead

is repaired the same way. Replace the washer with another of the same type and size. You can

minimize the frequency of this repair by remembering not to turn faucets off with excessive force.

Please note that some manufacturers do not use rubber washers.

Extended Absence

If you plan to be away for an extended period, you should shut off the main water supply to your

home. The main shutoff is located behind the shutoff panel, which will be pointed out to you on

your initial orientation. Do not shut off the heating valve.

Freezing Pipes

Provided the home is heated at a normal level, pipes should not freeze at temperatures above

18°C.

Leaks

If a major plumbing leak occurs, the first step is to turn off the supply of water to the area involved.

This may mean shutting off the water to the entire home. Then contact the strata corporation or

your property manager.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 102 103

Comentarios a estos manuales

Sin comentarios

Miele KM 360 G Especificaciones Pagina 62

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Miele KM 360 G