Miele KM 542 Instrucciones de operaciones descargar pdf (Pagina 52)

You can change the default settings of the programme

options (see chart). Several settings can be altered in

succession.

After selecting programming mode, P (Programme) and S

(Status) will appear in the timer display. On cooktops with 3

cooking zones, an additional indicator will appear at the rear

left.

The programme is shown in the numerical keypad displays at

the front left and rear left. Example:

Programme 3 = front left 3, rear left 0

Programme 14 = front left 4, rear left 1

The status is shown in the numerical keypad display at the

rear right.

Once you have left the programming mode, the cooktop will

be reset automatically. This is completed when an indicator

above the s sensor lights up briefly.

Do not switch the cooktop on again until the reset process

is completed.

To call up programming mode

^ With the cooktop switched off, touch the s and $ sensors

at the same time until the safety lock indicator light

flashes.

To set the programme setting

To set the units position touch the relevant number on the

front left numerical keypad.

To set the tens position touch the relevant number on the

rear left numerical keypad.

To set the status setting

Touch the appropriate number on the front right numerical

keypad.

To save settings

Touch the s sensor until all the displays go out.

To not save settings

Touch the $ sensor until all the displays go out.

Programming

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

Sin comentarios

Miele KM 542 Instrucciones de operaciones Pagina 52