Miele KM5958 Manual de usuario descargar pdf (Pagina 79)

Solid wood, tiled and glass worktops

a Worktop

b Hob

c Gap

d Wooden frame 13 mm

(to be provided on site)

As the ceramic glass and the

worktop cut-out have a certain

dimensional tolerance, the size of

gap c can vary (min. 1 mm).

^

Make the worktop cut-out as shown

in "Building-in dimensions".

^

Fix the wooden frame d 7mm

below the top edge of the worktop

(see diagram).

^

Feed the hob connection cable down

through the cut-out.

^

Centre the hob b in the cut-out.

^

Connect the hob to the mains.

^

Check that the hob works.

^

Seal the remaining gap c with a

silicone sealant that is heat-resistant

to at least 160 °C.

Observe the silicone sealant

manufacturer’s instructions.

For granite and marble tiles, only

use silicone sealant that has been

especially formulated for granite and

marble.

Flush-fitted hobs

79

1 2 ... 74 75 76 77 78 79 80 81 82 83 84

Comentarios a estos manuales

Sin comentarios