Miele B 890 Información técnica descargar pdf (Pagina 29)

Technical Information

B890 Rotary Iron

5.10 Driveshaft - Removal

1. Remove the screw from the rear of the cover around the control

panel.

2. Lift the hood at the rear and unclip it at the front.

3. Remove the cover assembly.

4. Perform the “Roller Assembly - Removal” procedure.

5. Access the interior side of the frame (where cover was just

removed from).

6. Remove the e-clip from the end of the drive shaft (next to the

gear)

7. Remove the shaft from the gear by pulling the shaft away from

the appliance.

8. Remove the cog wheel.

9. Remove the shaft.

5.11 Roller Drive Motor (M17) - Removal

1. Perform the “Roller Assembly - Removal” procedure.

2. Perform the “Driveshaft - Removal” procedure.

3. Remove the 2 screws securing the motor to the frame from

outside frame, as shown in figure2.

Figure 5-3: The motor is mounted to the

frame using two bolts.

4. Remove the motor partially by lifting it upward.

5. Unplug the motor from the harness.

6. Continue to lift the motor out of the appliance.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Sin comentarios

Miele B 890 Información técnica Pagina 29