Miele CS1223I-1 Manual descargar pdf (Pagina 30)

Fit the wall units and extractor hood

before fitting the appliance to avoid

damaging the surface.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

After installation, ensure that the

connection cable is without hindrance

and that there is no mechanical

obstruction which could damage it,

such as a drawer.

This appliance must not be installed

over a dishwasher, washing machine,

tumble dryer, refrigerator or freezer.

The high temperatures radiated by the

wok could damage the appliance

below.

The appliance may only be built in

over a Miele oven if the worktop is at

least 40 mm thick.

Observe carefully the safety

distances given on the following pages.

All dimensions in this instruction booklet

are given in mm.

Safety instructions for installation

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Sin comentarios

Miele CS1223I-1 Manual Pagina 30